Inspection items for use of electronic universal testing machines.
- Electronic universal testing machine space inspection
A. Tension, compression, limited space;
B. Effective distance between testing machines;
C. Machine size;
D. Testing machine workbench; - Crossbeam operation inspection of plastic electronic universal testing machine
A. The cross beam operates normally;
B. Each speed operates smoothly;
C. Running distance and whether it is overshoot.
D. Belt and tension. - Necessary check points on the control panel of the plastic electronic universal testing machine
A. Panel display function.
B. Panel button functions. - Electronic universal testing machines often need to be lubricated
A. The reducer under the workbench;
B. Bearings at the upper and lower ends of the screw;
C. Lead screw, nut; - Necessary points for inspection before use of plastic electronic universal testing machine
A. In an environment with room temperature and low relative humidity.
B. The electronic universal testing machine is installed correctly.
C. There is no corrosive medium around.
D. The power supply voltage does not fluctuate greatly;
E. The host must be grounded. - The load system of the plastic electronic universal testing machine must check whether the sensor appearance is damaged;
- Safety performance inspection of plastic electronic universal testing machine
A. Overload protection function;
B. The machine will stop automatically when the sample is broken; - Plastic electronic universal testing machine transmission system inspection: motor noise;
- Inspection of accessories, such as fixtures, operating instructions, software manuals, certificates, packing lists, random tools, etc.
- Strain system inspection, calibration and reset of extensometer: measure standard length.
